Norski 421 Epoxy Resin
ResinsNorski 421 Epoxy Resin is one of our flagship products that has a multitude of uses. Normally used in conjunction with our Norski Glass Cloth for laminating, this epoxy resin will stick to anything and offer a holding power that will impress anyone. Mixed at a 4:1 ratio ( by volume, not weight) with the supplied hardener, a bandage or patch repair of enormous strength can be achieved. Multiple layers can be achieved by allowing the product to cure , giving the repair a quick sand then repeating the process, This will only enhance the strength of the repair. Once the desired layering has been achieved, a light sand then paint with any enamel or acrylic paint will see your repair last a lifetime.
The product images shown are for illustration purposes only and may not be an exact representation of the product.
Click here to view the safety data sheet. Base
Click here to view the safety data sheet. Hardener
Click here to download the user instructions.
VIEW NOW
Norski Epoxy Doming Resin
ResinsOur Doming Resin is one of our more popular products, otherwise known around the world as 'Liquid Glass'. This resin can be used to create the appearance of an article being wrapped in glass. We've been making, selling and supporting this product for over 20 years and the products and articles that people have made using this product are too many to list here.
River tables, amazing coatings over virtually any substrate, this is your 'go to' product.
Available widely from our resellers or direct off this website.
Please note: This product is mixed by volume, not by weight, you need to measure the volume from Part A and Part B as they don't weigh the same.
Please have a look at the link below for the 'User Instructions' there is plenty of info provided on this product, we even have a section of our gallery images dedicated to jobs that people have sent in. Click above on 'Gallery' to take a look.
We make and continue to sell this product extensively in New Zealand, small (test) quantities are available through our resellers Mitre 10 and Bunnings and larger quantities directly off our website. We will ship to your door.
The product images shown are for illustration purposes only and may not be an exact representation of the product.
Click here to view the safety data sheet. (Base)
Click here to view the safety data sheet. (Hardener)
Click here to view the user instructions.
VIEW NOW
Norski Epoxy Timber Sealer
ResinsOur Norski Epoxy Timber Sealer is a two-part penetrating solution which is your 'go to' for rotten or degraded timber. This product is full of solvent which allows the 1:1 mixed solution to soak into timber of any sort and create an epoxyhard coating that will arrest mould, rot and fungus. This is available in a range of sizes starting from 500ml to suit your needs. Keep applying the mixed solution in 15-20 minute intervals until you see it appear glossy, that's when the seal has occurred. Then fill with any filler and paint with either acrylic or enamel paint.
The product images shown are for illustration purposes only and may not be an exact representation of the product.
Click here to view the safety data sheet. Base
Click here to view the safety data sheet. Hardener
Click here to view the user instructions.
VIEW NOW
Norski Epoxy Knot Fill Resin
ResinsWe developed Norski Knot Fill resin specifically for use for filling floor or table knots and imperfections where a super hard result is required. Appearing almost clear, this epoxy solution is perfect for high traffic areas or where that extra resistance is required.
Click here to view the safety data sheet. Base
Click here to view the safety data sheet. Hardener
Click here to view the user instructions.
Norski Silica Sand
SundryOne kilogram bags of sand, supplied in either ‘fine’ or ‘coarse’ variants for adding to any substrate to create a non-skid finish.
VIEW NOW
Norski Epoxy Carborundum
AdhesivesEpoxy Carborundum is an epoxy based filler with the inclusion of ‘carborundum chips’, which means this product, when mixed correctly with it's supplied hardener is resistant to continual sliding or bashing movements against itself.
We designed this product for application on the keel of dinghy’s that are perpetually being pulled up on the beach. Regularly, after a few years of the same sliding movement against the sand, wear is inevitable. This can clearly become a problem on more lightweight fibreglass, or even aluminium dinghy’s.
We’ve sold this to heaps of jetski owners who are sick of seeing the bottom of their jetski starting to wear out.
It's even been applied to the sides of crayfish boats where the cray pots are banging against the side of the aluminium.
Please note the image may not be an exact replication of what is shipped.
Click here to view the safety data sheet. Base
Click here to view the safety data sheet. Hardener
VIEW NOW
Norski Filler Powder - Q Cells
PowdersFiller Powder (Q-Cells) are white microscopic glass spheres that can be added to our world famous 421 Epoxy Resin. Once the resin has cured with the filler powder embedded in it, upon being sanded, the microscopic spheres explode. Therefore, you can produce your own filler with it's own consistency. You can add the Filler Powder up to 4 times the volume of the resin. The more filler powder added to the resin, the more bulked up the with the powder the mixed solution becomes and has the effect of being easier to sand. (ie: softer)
Click here to view the SDS for this product
Norski Glue Powder - Aerosil
PowdersSimilar to the Filler Powder, our Glue Powder can be added to our 4 to 1 Epoxy Resin to create a ‘super sticky’ glue. This can be very handy when trying to glue something upside down or where you don’t want the glue to move whilst curing.
Typically used in a mixing ratio of 1-1.5 parts of Aerosil to 1 part of resin
Click here to download the SDS for this product
VIEW NOW
