Norstik Epoxy Glue 1:1
AdhesivesWe've been making this product for years and there's a very good reason why, Value for money this is the best epoxy glue that is made in New Zealand. This is our flagship glue product that needs 8 hours minimum to cure and is cream in colour when set, This product is widely used as both a construction adhesive and a DIY product due to the fact that it's excellent value for money and will bond almost any substrate to itself or any other substrate. Glass, metals, timber, ceramics and most plastics are no problem for 'Norstik Epoxy Glue'
This is a slow setting product which is great for glues as it gives you time to position your objects together correctly for alignment.
Click here to view the user instructions.
Click here to view the SDS for Part A - Base
Click here to view the SDS for Part B - Hardener
VIEW NOWNorski 2:1 Hi Strength Adhesive
AdhesivesOur 2:1 High Strength Adhesive will create a non-flexible bond and hold over 200Kg's of force. Cream in colour when mixed with the correct amount of hardener, this product will bond almost any substance to itself or dis-similar material.
Ideal for use on concrete, wood, most metals, ceramics, fibreglass, glass, most plastics and pretty much anything. This is a gel type of product and contains no solvents. Especially suitable for harsh environments (exterior, marine, etc), this glue will hold on when the others let go.
It also posses good gap filling properties and of course it can be drilled, screwed, sanded and painted with any enamel or acrylic paint. Surfaces need to be clean and dry for adhesion to take place.
The product images shown are for illustration purposes only and may not be an exact representation of the product.
Click here to view the safety data sheet. Base
Click here to view the safety data sheet. Hardener
Click here to view the user instructions.
VIEW NOWNorski 5 Minute Epoxy Adhesive
AdhesivesOur 5 Minute Epoxy product sets crystal clear and bonds virtually any substance to either itself or dis-similar material in under 5 minutes, Timber, steel, ceramics, most plastics, are no problem Epoxy technology is the best type of technology for glues and fillers as it's load-bearing strength is enormous compared to most single part products. So with this product, you have the best of both worlds, as in, enormous holding power that is achieved very quickly.
The product images shown are for illustration purposes only and may not be an exact representation of the product.
Click here to view the safety data sheet. Base
Click here to view the safety data sheet. Hardener
Click here to view the user instructions.
VIEW NOW