Timber Sealer (Preservative)

An amber coloured two pack, penetrating solution to waterproof, seal, and densify timbers, chipboard and plywoods. Kills dry rot and stabilises soft rot affected wood. Protects against fungi. Can be varnished over in areas not exposed to direct sunlight, but is best painted over. Colour: Amber. Mixing Ratio 1:1.

421 Epoxy Resin

Epoxy system is aspecially designed epoxy laminating/sheathing and adhesive system for marine and general use. Designed to be used with a range of glue and filler powders. Easy to use. Mix ratio four parts A to one part B.

Norski Polyester Resin

General purpose waxed resin, for the use with fiberglass matting and gun stock (unwaxed avaible on request) Mixing Ratio: 1-2% by volume with MEKP Catalyst.

Kleer-Kast Resin

A diamond clear embedding resin. Liquid resin will not discolour Cured resin is rock hard, resists chipping, breaking, cracking, and crazing. Can be used with colour dyes for sparkling translucent casting. Used to embed monograms, butterflies, shells, zoological specimens, botanical and anatomical samples . Supplied complete with Norski MEKP Hardener. Klear Kast is a clear embedding resin, NOT suitable as a surface coating or to be used as a gap filler in wood. Mixed by volume 1-2% with mekp hardener.

Surf Board Resin

Clear Surf Board Resin for the repairs and manufacture of Surf Boards. Mixing Ratio: 1-2% by volume MEKP Catalyst.

High Stress Resin

For use in Starter Rods into concrete and sealing around bolts, injecting into cracks into concrete. Mix Ratio 4:1 volume

Doming Resin

Clear top coat resin for wooden tops (decorative), wooden plaques, badges, decoupage, for interior use only. Mixing Ratio 2:1

Epoxy Knot Fill Resin

Clear topcoat resin for use in filling wooden holes. Mixing Ration 4:1

Gelcoat

Non-yellowing high build un-waxed resin that leaves a tacky surface to enable subsequent lamination. Can be tinted with Norski Pigment Pastes to replace the original colour. Requires Norski Polyester MEKP Hardener for curing. Colours: White (GCW) and natural (unpigmented) (GCN).

White Flow Coat

A waxed resin coating for refurbishing the interior of fibreglass boats and repairs to chips and cracks on gelcoated areas. Leaves a crisp, non-tacky film when cured. Colours: White (FCW). Can be tinted with Norski Pigment Pastes (FCC). Requires Norski Polyester MEKP Hardener for curing.